How To Install A Shade Sail Over Deck

We ran an extension cord up to one of the house anchor points and used the included clips on the lights to attach them to the sail. Patio stones can be substituted in place of the poured concrete.

Pin by iD Zen on Sail Shade Installation Shade sail, Deck

Many will have restrictions what can be attached to your home especially on the front side of.

How to install a shade sail over deck. Attach shade cloth to one of the longest. To install standalone posts, dig holes for them to go in. Tighten the wing nuts on the clamps to secure the rod.

Outdoor sun shade sails provide sun protection innovative design and value. Here’s a picture of car loaded up with the 6 x 6 shade sail posts, concrete and paver base. The first step in this shade sail installation project was figuring out where everything would go.

Chris lambton adds shade to the yard in a unique way by hanging a real boat sail. Raise the shade sail up to the fascia and slip its head rod into the clamps. Start with a pergola, arbor, or another structure you wish to cover with the shade cloth.

Scott explained that the shelterlogic shade sail came with the necessary hardware for easy installation, so it was not necessary for him to go out and look for additional hardware. Putting up a shade sail may look like a cinch, but there comes an extensive range of accessories to help you secure your shade sail. Just be sure to choose a suitable location before you commence installation.

Attach the sail to posts set in the ground to provide shade where it's most needed. Install the shade sail posts. Preparing the shade sail materials.

Look at its mature size and plan accordingly. I spread out the sun shade sail on the backyard lawn to double check the measurements. Once we were happy with the location of the shade sail, it was.

Secure the ladder well and keep three points of contact with it at all times. I was ready to install the shade sail. Next, pour a 4 inch (100mrn) depth of concrete to provide a solid pad.

Roll out the shade cloth across your structure and loosely pull it into position. Dig an 800mm hole for a 3m shade sail and 1200mm hole for a 5m shade sail. A quality shade sail will use stainless steel d rings in the corners and will have reinforced edges.

The depth of the hole will depend on the size of the shade sail. Shade your patio or yard with a triangle shade sail. Install three steel posts attaching.

Install three steel posts, attaching them to the deck framing to support the shade sail. Lay a 4 inch (100mm) depth of 3/4 inch diameter gravel at the base of the hole. Fasten each post with lag screws and carriage bolts.

Plant trees larger than that at least 15 feet away. Your shade sail will arrive nicely folded (hopefully). We like to entertain outside, and thought some globe string lights would be a nice enhancement.

Keep trees with a mature height under 25 feet at least eight feet from the house; We installed 4×4 posts (we should have used metal poles) where we wanted the sails to attach to. Then we laid out the shade sails on the ground in the manner in which we wanted to hang them, then measured how much we would need to extend each end to reach the posts.

The savings was huge and a sun shade sail was the perfect quick solution to blocking the hot summer sun. Is used to fasten shade sail corner loop to a fixing point and give tension on the shade sail. How to install a sail shade.

Sun sail shade over deck. Consider the size of the shade sail, sun direction, strength of existing structures, the right attachment point and fixing point, and more. After we received our 16’x20’ shade sail, we laid it on the ground of our backyard.

We like spending time on our deck but obviously don't enjoy spending time on the deck i. Deciduous trees (trees that lose their leaves in the fall) typically make the best shade trees. Wrap shade sail clamps around the support posts you installed, or, if the posts made from wood, drill a pilot hole and then install eye bolts into the posts.

The first step is to check with your homeowner association to verify you can install a sail shade. It ensures that the tension is even across the whole shade sail. Use strong twine or rope to attach the shade to poles, the side of the house, or nearby trees.

Insert the post with a hold down bolt through the post to keep it secure.

DoItForMe Install Tips Consider how big you want to go