How To Make A Macrame Plant Hanger Without A Ring

Cut 8 pieces of macramé cord 200 inches each. Small potted plant with drainage plate (if indoors) hook to hang from (swag hook) fyi this guide for a macrame plant hanger is going to be a loose diy.

Modern Macrame Plant Hanger Without Tassel on Bottom Small

Combine 2 strands from 1 series of knots with 2 strands from series of knots next to it and make a square knot, or series of several square knots.

How to make a macrame plant hanger without a ring. Examples of this can be found in video #1. Learn how to make your own simple diy macrame plant hanger. Materials for macramé plant hanger ~100′ nylon/ paracord/ cotton rope.

I can also recommend using some bigger hooks to hang the planters from your wall. Each macrame hanger is handcrafted when ordered, so sizing may vary slightly. It features three types of basic decorative knots.

Wrap the string around your finger and then pull the folding part of the string through the loop and pull tight. You can add beads, decorations, or additional knots to add character. Make a loop and start winding the long part of the strand around the knot (and loop).

Lastly trim and comb the ends and your macrame plant hanger is complete. When happy take the strand through what is left of the loop. Lay the 1 yard piece of cord on top of your cord bundle in a v shape.

Then just cut the excess cord. Ivory, sand, gray, black, white and terracotta.by default i make plant hangers on natural wooden rings, but you can choose the type of the ring up the top (see the last photo) and notify me in the comments to the order.but please note, i have only natural wooden beads (if you choose plant hangers with beads).these handmade macrame plant hangers are made with 100% natural. This macrame pattern incorporates a lot of small knots that look best with a thin twine like rope.

Can’t wait to see the end result! 15 adorable beginner friendly diy macrame keychains 7 diy layered macrame wall hanging. Diy easy macrame plant hanger from alice and lois.

Now separate the bundle of cords into four groups with four cords in each group. Now pull the knot tight and then pull each individual strand to tighten them all equally. *please note, this listing is for the macramé plant hanger only, plants and pots are not included.

Lay the 8 cords together and fold the bundle in half so you have 16 cords with a loop. Position the 1 yard piece of cord so the left side of the v is shorter than the right side. How to make a diy macrame plant hanger.

This basic plant hanger is an easy macrame pattern suitable for beginners. Space out the macrame cords in the ring to begin this plant hanger crown knot, you will need an even number of cords going through the ring. For this project, you are doing the exact same thing, but instead of one string, you will form a.

Make sure to leave enough room in the loop for the plant hanger to hang. Holding the bottom of the v shape, wrap the bundle with the longer piece of cord. Then take the first pair and loop them around each other to make a simple knot.

To cover the ring, cut a piece of cord 75 inches long. Thanks for your question 🙂 you can start the plant hanger off with a wooden ring, that will make it a bit smaller. Measure 3 inches from the folded loop and secure the cords together with tape.

You can go smart with the color of rope while crafting your favorite macrame hangers. Take a ruler or tape measure and measure 18 in (46 cm) down from the top knot. 8 ropes of 12′ or 12 ropes of 8′ (for a smaller project) 2 ropes of 2′ metal or wood rings;

How to start a macrame plant hanger using a crown knot with and without ring step 1: Repeat 3 more times to create 4 sets of knots, always using 2 strands from 1. Attach each pair of strands together 18 in (46 cm) from the top knot.

The rope colors that match or contrast best to your room decor will just be appreciated. Take 2 cords and make 8 half knots to bind all your cords together. So, this macrame plant hanger has been done using a black rope that goes enchanting to a white painted interior.

Make sure you practice them before you get started. The cradle is designed to support any size pot. Pull on the strand in the top until the strand in the bottom is hidden under the winding.

Take your 8 pieces of macrame cord and thread them through your ring. Pull the loop of cords through the ring a little more and grasp the cords below and pull them through as picture in the images below. Fold the cords in half to find the centre at the top of your ring.

Grab your 1 yard piece of cord. Plant hanger with black rope:

Handmade 32" Macrame Plant Hanger made with 4mm braided